Campbell T4900524 Cold Shut, 5/16 in Trade, 1300 lb Working Load, Mild Steel, Zinc
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Specifications
- Finish
- Zinc
- Inside Length
- 1-3/8 in
- Inside Width
- 7/16 in
- Material
- Mild Steel
- Trade Size
- 5/16 in
- Working Load Limit
- 1300 lb
- Manufacturer
- CAMPBELL